4X125W POWER AMPLIFIER. 100v/4Ohm. 2U RAC.

€ 868,25

(Bruto excl. BTW)
Artikelnummer
PA AUP4125S PRL

This series of audio power amplifiers was designed to fulfil an evolving market in the most flexible and professional manner. 
The new range responds to precise operating criteria, and was designed and tested to guarantee total reliability of use, also with continuous operation. 
Thanks to the use of power supply switching with SMPS (switch mode power supply) technology and obtaining 70/100V electronically without transformers, it was possible to insert as many as 4 entirely independent audio power amplifiers in a single cabinet, succeeding in containing the weight and size.

MAIN FUNCTIONS:
•    4 constant electrical impedance outputs (4 ohm)
•    4 constant voltage outputs (70/100V) obtained electronically without the use of output transformers.
•    Balanced inputs for each channel
•    Priority balanced input with independent level control of each channel.
•    Independent Master control for each channel.
•    Independent Low and High pitch control on the 4 channels.
•    PA-HF filter individually inserted at the rear of each channel
•    LED Protection Indicator
•    LED signal indicator
•    Operation mode LED indicator (4 ohm/70/100V)
•    SMPS (switch mode power supply) switching technology
•    2 U-shaped fins to fasten to a 19" rack

Technical Specifications

  • Model: AUP4125S 
  • Output power RMS: 4 x 125W
  • Inputs: 4 X balanced line - 4 X Priority unbalanced line
  • Input Sensitivity: Line: 1V/47kΩ - variable gain 600Ω
  • Controls:4 Master volume controls - 4 treble tone controls - 4 bass tone controls
  • Loudspeakers outputs:    100/70V/4Ω
  • Frequency response: 20Hz -20khz (-3dB)
  • Distortion (THD): < 0.5% (@ Pnom 1KHz)
  • S/N Ratio: ≥90dB
  • Power Supply: 230/117Vac 50/60Hz
  • Operating temperature: 0 -40°C
  • Input/Output Connectors:    screw terminals/terminal block
  • Power Consumption: 1000VA
  • Dimensions (LxHxP)  (mm):  434x88.5x425 – 2 rack units 19”
  • Weight (Kg): 9.75Kg (21.5lb)
Artikel document PA_AUP4150S.0.pdf
Merk Proel
Power connector Euro
BxDxH in cm 43,4 x 42,5 x 88,5
Aantal hoogte eenheden in HE 2
Gewicht in Kg 9.75Kg
Constructie materiaal Metaal
Verkrijgbare kleuren Zwart
Eindversterker laag ohmig
Eindversterker 100V
Klasse typering Klasse D
Aantal versterkerkanalen 4
Vermogen aan 4 ohm 4x125W
Frequentie bereik 20 - 20kHz (-3dB)
Signaal/ruis verhouding >90dB
THD 0,5%
Vermogen 100V 4x125W
19" inbouwbaar

Een moment gebuld a.u.b.