Command Fusion 8 x IO input/output module

Prijs op aanvraag

Artikelnummer
MOD-IO8 CMF

Overview

The IO8 module features 8 user configurable I/O ports, and comes with spring terminals for quick and easy, yet secure connections to external inputs/sensors/outputs. Plug it into a modular controller to add I/O ports to your system.

Notifications

The IO8 can be setup to send notifications based on a configurable minimum change level per port. Notifications can be sent as a broadcast to all CFLink devices, to specific CFLink IDs or both.

Dry Contact Input

When a port is configured as a dry contact input, it will give a reading on it's open/closed state. Used for button inputs, sensor triggers, etc.

LED Output

When a port is configured as an LED output, it can be set to on or off state, 5V DC 1mA max.

Resistance Reading

When a port is configured as a resistance reading input, it can measure input ranging from 0 Ohm to 10,000 Ohm, in 100 Ohm increments. Used for light sensors, temperature sensors, etc.

Voltage Reading

When a port is configured as a voltage reading input, it can measure input ranging from 0V DC to 10V DC, in 0.1 Volt increments. Used for battery level sensors, video signal sensors, etc.

Video Sensing Input

This input mode will detect the presence of a video signal, great for real feedback if a device such as a Bluray player is powered on.

External Relay Control Output

When a port is configured as an external relay control output, it can be set to on or off state. An external power source is required (0-24V DC).

Artikel document CommandFusion_MOD-IO8_Spec-Sheet.pdf
47QuickReferenceGuide-Modules.pdf
Merk CommandFusion
BxDxH in cm 4 x 6,8 x 3,28cm
Gewicht in Kg 0,05kg
Constructie materiaal Kunststof
Constructie materiaal specifiek Polycarbonate
Verkrijgbare kleuren Dark grey matte finish

Een moment gebuld a.u.b.