Fohhn, ABX-3 , AIREA DSP interface, analogue audio (XLR) and AIREA-Net outputs, built-in Fohhn Audio DSP

Prijs op aanvraag


ABX-3 - the new AIREA Break Out Extension with integrated Fohhn DSP

The compact (105 x 45 x 95 mm) digital-to-analogue converter has the same basic functionality as the ABX-1, but also contains its own high performance Fohhn DSP. This enables the inclusion of active loudspeakers without integrated Fohhn DSPs in the AIREA system. When the ABX-3 is connected in the signal path before a group of these speakers, it acts as their Master, providing additional signal processing functions such as EQ and Delay. It also facilities more effective remote control when using Fohhn Audio Soft.

Equipped with its own AIREA-Net outputs, the ABX-3 additionally offers a means of signal routing that has the following advantages: Signals can now also be split and routed. This, in turn, further simplifies the cabling requirement.

Compact Digital to Analogue Converter with integrated DSP for use in a Digital Audio Network System

High-quality, 2-channel Digital to Analogue Converter in a lightweight, compact housing.

Developed for dedicated use in a digital audio network system that includes active loudspeakers with integrated digital amplifiers and DSP technology, Master modules and other system components.

The ABX-3 is equipped with its own digital signal processor (DSP) to provide additional signal processing functions. This enables active loudspeakers without integrated DSP technology to be connected into the digital audio network system.

Connections: The unit has an input (RJ-45 in / Neutrik etherCON) for digital AES/EBU audio signals and power supply, as well as two corresponding outputs (RJ-45 out / Neutrik etherCON) – making split routing of all signals possible. It also has an output (RJ-45 / Neutrik etherCON) for carrying digital control signals, plus two separate analogue outputs (XLR balanced).

Audio inputs: AIREA®-NET with AES/EBU 24 Bit / 32 kHz – 96 kHz
Audio outputs: 2 separate analogue audio outputs (XLR balanced)
Max. output level: +15 dBu
Output impedance: 100 Ohm
Frequency range: 20 Hz – 20 kHz
Signal/Noise ratio: > 110 dB/A
THD: < 0,002 % typ., < 0,001 % 1 kHz +6 dBu output
Power supply: AIREA®-NET 48 V
Power consumption: 2 W, AIREA®-NET load max. 5 W
Safety: semiconductor fuse, internal
Temperature range: 0 – 40 °C
Cooling: passive 
Dimensions (W x H x D): approx. 105 x 45 x 95 mm

AIREA®-NET: 1 x RJ-45 in, 2 x RJ-45 out
FOHHN®-NET: 1 x RJ-45
Analogue output: 2 x XLR balanced

Remote control : AIREA®-NET, FOHHN® AUDIO SOFT
Remote monitoring: Protect, Signals, Power Supply, FOHHN®-Net, FOHHN® AUDIO SOFT, AES/EBU available

Filter technology: 80-Bit double precision
FIR filter: yes
Gain: -80 dB – +12 dB
Volume: -80 dB – +12 dB
EQ: 10-band parametric EQ, Gain +/-12 dB, Frequency 10 – 20 kHz, Q 0,1 – 100
Limiter / Compressor: 2
Noise Gate: 2
X-Over: per Linkwitz-Riley 4th Order (24 dB / Octave), High pass 10 Hz – 20 kHz, Low pass 10 Hz – 20 kHz
Delay: 0 – 350 ms (0 – 120 m)

Error: red
On (audio): green
DSP enabled: green
Power: green
Send: yellow
Receive: green
On (identification): blue

Manufacturer: Fohhn Audio AG
Model: ABX-3

Artikel document manual_airea-master6
Merk Fohhn
BxDxH in cm 10,5 x 9,5 x 4,5
Constructie materiaal Aluminium
Verkrijgbare kleuren Zwart
Input connectors AIREA®-NET 1 x RJ-45 in
Main output connectors 2x Analog XLR bal. out, FOHHN®-NET RJ-45 out, 2x AIREA®-NET RJ-45 out

Een moment gebuld a.u.b.