Niet Meer Leverbaar - Fohhn, Focus Modular FM-110, electronically steerable high module. 16x 1"CD. Rental version Black.

The Main Facts at a Glance:

• High performance, high frequency module with 1” compression drivers, Waveguide and horn (SPL max: 148 dB)
• Powerful, musical sound
• Real-time beam steering via intuitive software
• Ultra-fine adjustment of loudspeaker beams in 0.1° increments
• Vertical beam width 0°-90°
• Vertical sound inclination angle -40° to +40°
• Side Lobe Free Technology – suppresses side lobes
• Two Beam Technology – two separate beams per module
• Suitable for mobile and fixed installation applications
• Excellent speech intelligibility, even in reverberant acoustics
• Build into the wall for complete invisibility
• Can be combined and cascaded
• No mechanical curving
• Extremely compact, low weight
• Short set-up time
• Extremely long reach

High performance, high frequency module with beam steering technology, equipped with 16 neodymium 1” compression drivers with Waveguide / horn system.
16 state-of-the-art Class D amplifiers are also integrated, as well as a specially developed 8-channel DSP processor for beam steering capability. The loudspeaker can reach a maximum SPL of 148dB / 1 metre. Its vertical beam width (0°-90°) and sound inclination angle (-40°/+40°) can be adjusted in real time, in 0.1? increments, using Fohhn Audio Soft control software. This ultra-fine degree of adjustment enables the speaker beam to be targeted with extreme precision towards the required audience area.
The speaker output can be split into two separate beams (Fohhn Two Beam Technology), enabling simultaneous coverage of different areas such as stalls and balcony. A further feature is Fohhn’s Side Lobe Free technology. This algorithm is designed to suppress the unwanted side lobes that inevitably occur with line arrays, resulting in greatly improved speech intelligibility.
The elegant speaker housing is constructed from premium quality multi-ply birch wood. Loudspeaker drivers and electronics are protected by a steel front grille, backed by acoustic foam, specially designed to give maximum sound transparency.
Two or more Linea Focus Modular units can be securely combined in seconds using Fohhn’s own Quick-Lock system. Flying mechanics can also be secured using Quick-Lock. Optional brackets for ceiling and wall mounting, and also for flown applications, are separately available. CAAD simulation data for EASE is available on request.
The FMI-110 fixed installation model is also equipped with important features that enable its integration into emergency evacuation systems (in accordance with EN60849 requirements). The connector panel has a protective cover with slots to accommodate cabling.

Fohhn Linea Focus Modular FMI-110
Electronically steerable, high performance line array modules with monitoring capability for fixed installation applications The FMI-100 is a high performance, high frequency module containing 16 powerful 1” compression drivers with Fohhn HF Waveguide and horn. The active module is also equipped with 16 state-of-the-art Class D amplifiers as well as a specially developed 16-channel DSP processor for beam steering capability. An additional DSP gives the user access to a range of audio tools including 10-band EQ, compressor/limiter, delay, sweep tone and pink noise generator. A further DSP contains a special algorithm designed to give maximum protection to each individual speaker.
The perfect combination of loudspeaker, amplifier and DSP technology enables the FMI-100 to achieve a maximum SPL of 148 dB. The module has a frequency range of 1kHz – 17kHz, with a signal-to-noise ratio of > 105dB. The FMI-110 can be combined with other FMI-100, FMI-400 or FMI-110 modules from the Focus Modular series.
The loudspeaker’s vertical sound inclination angle (-40°/+40°) and vertical beam width (0°-90°) can be adjusted in real time, in 0.1? increments, using the intuitive Fohhn Audio Soft control software. Such a fine degree of adjustment enables the speaker beam to be targeted with extreme precision towards the required audience area.
Fohhn’s innovative dual-beam technology adds a further dimension, enabling the FM-100 to generate two separate beams in its vertical dispersion range. This allows two different audience areas (such as stalls and gallery) to be simultaneously targeted for maximum effective coverage. A digital high pass filter can be separately applied to each beam and the acoustic centre of the individual beams adjusted in real time and set at any point of the loudspeaker’s line length. A specially developed algorithm also enables the suppression of any unwanted side lobes in the beam.
The loudspeaker module is equipped with pilot tone monitoring that enables its integration into an emergency evacuation system. The following errors can be detected and displayed:

• internal voltage supply issues; overheating; short circuit on amplifier output stages
• interference on amplifier outputs due to earthing or voltage supply issues
• speaker short circuit; high resistance fault (from impedance measuring, in development)
• missing pilot tone on input 2 (configurable); network errors

Error messages are indicated via fault message contact (relay 2 x alter), red flashing LED, or status messages in Fohhn Audio Soft. Error messages cannot be read via RS-485 and Ethernet.
The loudspeaker system additionally offers:

• Priority switching to input channel 2. (If an audio signal of more than -30dBV is detected at input 2, input 1 is automatically silenced and input 2 activated. A system with 2 redundant audio lines can also be created.)
• 24V DC emergency power operation
• Adjustment and monitoring of all parameters in real time using Fohhn Audio Soft. The loudspeaker’s beam characteristics, volume alignment and frequency response are all graphically displayed and adjustments are shown in real time.
• Simple and intuitive operation via mouse.

In addition to the standard black and white factory finishes, Linea Focus Modular can be supplied in a full range of RAL colours.
The FMI-100’s slim, elegant and unobtrusive housing is constructed from premium quality multi-ply birch wood. A 2mm thick powder coated steel front grille, backed by acoustic foam and specially designed for maximum sound transparency, provides protection for the speaker drivers and electronics.
Each unit is reliably powered by a highly efficient green PSU with a maximum consumption of 5W in stand-by mode. Combining two or more Linea Focus Modular loudspeakers can be done in seconds using Fohhn’s dedicated Quick-Lock system. Flying mechanics can also be secured using Quick-Lock, making them both easily accessible and inconspicuous. Specific brackets for ceiling and wall mounting, as well as flown applications, are separately available. CAAD simulation data for EASE is also available.
FMI-110
Electro-acoustical features Acoustic design electronically steerable line array speaker Components 16x 1”compression driver with advanced Fohhn HF-Waveguide system Operating mode active, 8x DSP-amplifier, Class D Sensitivity 133 dB Power rating (peak) 148 dB @ 1 m (108 dB @ 100 m) Frequency range 1 kHz – 17 kHz Nominal dispersion horizontal 90° Vertical dispersion  electronically steerable in real time 0° - 90° in 0.1° steps Vertical sound inclination angle  electronically steerable in real time -40° - +40° in 0.1° steps distinctive feature two adjustable beams possible, both beams are using complete line length, acoustic centre of both beams is individually movable over complete line length
features enclosure wooden enclosure (multiplex birch wood, quality category AA front panel ball impact resistant metal, powder coated standard colours black and white, polyurethane coating front design metal grille 2 mm steel in enclosure colour, deposited with acoustic foam dimensions (W x H x D) 224 x 1285 x 274 mm weight 38 kg
optinal features optional colours all RAL-colours
remote control, remote monitoring and simulation remote control Fohhn-Net via Fohhn Audio Soft remote monitoring temperature, protect, signals, power supply, Fohhn-Net, Fohhn Audio Soft, Pilot signal monitoring fault contact relay 2x alter simulation beam Fohhn-Net via Fohhn Audio Soft
electronic performance amplifier output 16x 120 W amplifier type Pure Path Digital PWM audio inputs two independent line inputs with automatic priority, symmetrical transformers audio outputs 2x parallel link-out DSP concept 3 DSP steps 1. USER-DSP with 10-band parametric EQ, dynamics, delay, X-Over, tunable Sinus- and Pink Noise-generator 2. SPEAKER PROTECTION-DSP with multiband-limiting 3. BEAMSTEERING-ENGINE-DSP for adjusting the vertical dispersion angle (0° to 90° in 0.1° steps) and control of vertical sound inclination angle (-40° to +40° in 0.1° steps) Amplification 28 dB Input sensitivity 1,4 V Frequency response 20 Hz – 20 kHz S/N ratio >105 dB/A Protective circuit soft start, temperature monitoring, short-circuit protection, overload power supply   Power supply 100 V - 240 V AC 4A 50/60 Hz, power supply with Power Factor Correction Current consumption standby 5 W, max 1000 W Protection 16 A Low power Green Power Standby Mode Emergency current possible extern USV 230 V / 1000 W 16 A protection Temperature range 0 – 40°C Cooling temperature-controlled fan Weight electronic ca. 6 kg
Controller Digital signal processors 2 Independent limiters 4 selective 3-band limiting bass/ mid/ high, band specific time constants filter technology 56-bit double precision AD 24 bit / 96 kHz, FIR filters Gain -80 dB to +12 dB Volume -80 dB to +12 dB EQ 10-band parametric EQ, gain +/-12 dB, frequency range 10 - 20 kHz, quality: Q 0,1 – 100 Dynamic unit limiter, compressor, Noise Gate X-Over Linkwitz-Riley 4. order, (24 dB/ octave) High pass filter 10 Hz to 20 kHz Low pass filter 10 Hz to 20 kHz Delay 0,01 to 350 ms (3,4 mm to 120 m)
Connections (all connections are internal) Fohhn-Net 2x in/ thru terminals Mains connections 2 pol Phoenix terminal, grounding screwed Audio inputs 2 independent line inputs with automatic priority, symmetrical transformers Audio outputs 2x link Fault contact relay 2x alter, link LED display internal, power on/ off (standby) green = on, red = standby, red flashing = fault, network control receive/ send remote control LED CAAD simulation data EASE
Make Fohhn Audio AG Type FMI-110